Page 1
THRUSTMASTER ® USER MANUAL TECHNICAL FEATURES 8-way stick 8 analog action buttons: X, Y, A, B, Black, White, T1 = right trigger, T2 = left trigger START button BACK button Slot for memory unit or other accessory TURBO button PROGRAM button COMBO button 10.
Page 2
Connect the Arcade Stick to any controller port of the Xbox™ console. You can even use your Arcade Stick with games that do not usually support this type of device. To do so, switch on your Xbox™ console and press and hold the BACK button (4) on your Arcade Stick while plugging it in.
Page 3
Press the button/direction that you wish to program with the same function as the button/direction selected in step 2 above: the LED turns green, and then switches off. The button/direction pressed in step 3 now has the same function as the button/direction selected in step 2.
Page 4
Press the action button (2) onto which you wish to apply the combo that you have just programmed. *You cannot program any actions while the LED is flashing. **If you do not enter an action within 5 seconds the red LED will flash and the entire procedure will be cancelled. You can program up to 8 different combos (1 per analog action button (2)).
Page 5
- The symbol represents a pause between 2 actions in the sequence. To program this combo onto the Arcade Stick’s A button: Press the PROGRAM button (7). Steps 1 and 2: beginning of the combo Press the COMBO button (9).
Need help?
Do you have a question about the Arcade Stick and is the answer not in the manual?
Questions and answers