Wi-Fi Settings - D-Link DAP-1520 User Manual

Section 3 - Configuration
This page lets you configure the Wi-Fi Network you would like the DAP-1520 to connect to. From the Home page, click on the
Settings drop-down menu at the top of the page, and select Wi-Fi.
Wireless This is set to Extender mode and cannot be changed.
Mode:
Wi-Fi Network Click Scan to use Site Survey to scan for available wireless
Name (SSID): networks within range of the DAP-1520. Select the one you
want to extend. You can also type in the name (SSID) of the
wireless network.
Security: Select the security method that is being used by the wireless
network that you have selected: WEP, WPA/WPA2, or None.
Password: If you selected WEP or WPA/WPA2, you will be required to
enter the password or security key for the network you are
attempting to join.
You can also use WPS to connect your wireless devices to
the DAP-1520's extended network. For further information
on how to do this, refer to
on page 42.
Save:
Click Save to save the settings and return to the Home page.
D-Link DAP-1520 User Manual

Wi-Fi Settings

"Connecting to a Wireless Client"
29