Using The Wps Method - D-Link DAP-1520 User Manual

Section 3 - Configuration

Using the WPS Method

The Wi-Fi Connection Setup Wizard gives you the option to use
the WPS configuration method. Click Select.this.option.if.your.
wireless.device.supports.WPS. Click Next to continue.
You will see instructions on the screen that say, Press the Push
Button (physical or virtual) on the AP (access point).or Router... You
have 120 seconds to press the button.
Press and hold the WPS button on your wireless router or access
point until the light starts blinking*. Allow up to two minutes for
the WPS process to complete.
When a connection is successfully made, you will see a notice on
the screen and the LED on the device will turn solid green.
*Note: For LED indicator details, refer to the user manual for your
router or access point.
D-Link DAP-1520 User Manual 20