Static Ipv6 - D-Link DAP-1520 User Manual

Section 3 - Configuration
IPv6 Device Management Interface
My IPv6 Select Static.IPv6 to manually assign an IP address to the
Connection is: DAP-1520.
IPv6 Address: Enter the IPv6. Address that you want to assign to the
extended network AP. This address should be outside of the
uplink router's DHCP address pool.
Subnet Prefix Enter the length of the IPv6 subnet prefix.
Length:
Default Gateway: Enter the Default.Gateway. (This is usually the IP address
of the uplink router.)
Primary DNS Enter the Primary IPv6 DNS.Server address.
Server:
Secondary DNS Enter the Secondary IPv6 DNS. Server address. This is
Server: optional but will provide backup if the primary server fails.
D-Link DAP-1520 User Manual

Static IPv6

33