Section 3 - Configuration
This page allows you to save or restore your system configuration, reset, or reboot the DAP-1520. From the Home page, click
on the Management drop down menu at the top of the page, and select System.
Save Settings
Save the system settings to a file on the local hard drive of
To Local Hard
your computer. You will then see a file dialog, allowing you to
Drive:
select a location and enter a file name for the configuration
file.
Load Settings
Load the system settings from a previously saved file on the
From Local
local hard drive.
Hard Drive:
Restore
Restore the system settings to factory default settings. This
to Factory
will erase all currently stored settings.
Default
Settings:
Reboot the
Click Reboot to reboot the DAP-1520.
Device:
D-Link DAP-1520 User Manual
System
36