Section 3 - Web-based Configuration
This page lets you configure the Wi-Fi settings to connect your DCH-M225 to another wireless network. This is the uplink
network which the DCH-M225 will then be able to extend. To access this page, click on the Settings drop-down menu at the
top of the page, and select Wi-Fi.
Wireless
This is set to Repeater mode and cannot be changed.
Mode:
Wi-Fi Network
Click Scan to scan for available wireless networks and select
Name (SSID):
the one you want to use the DCH-M225 to extend.
You can also type in the name (SSID) of the wireless network.
Security
Select the security method that is being used by the wireless
Mode:
network that you have selected: WEP, WPA-Personal, or
None.
Password:
If you selected WEP or WPA-Personal, you will be required
to enter the password or security key for the network you
are attempting to join.
You can also use WPS to connect your wireless devices to
the DCH-M225's extended network. For further information
on how to do this, please refer to "Connecting a Wireless
Client" on page 32.
Click Save to save the settings and return to the home page.
D-Link DCH-M225 User Manual
Wi-Fi Settings
22