Home Screen - D-Link DAP-1520 User Manual

Section 3 - Configuration
The Home screen shows the Current Status of devices connected to the DAP-1520. A green check mark between the Uplink
Router icon and the DAP-1520 icon indicates that there is an active connection. A red X indicates that there is no connection
present, or there is a connection error.
1 Setup Wizard
2 Home
3 Settings
4 Management
5 Uplink Router
6 Uplink Router Status
7 DAP-1520
8 Wi-Fi Clients
D-Link DAP-1520 User Manual
1
5
Click to launch the Wi-Fi Connection Setup Wizard. Refer to
Click to navigate to the Current Status page (as shown above).
Click to view or change your Wi-Fi, Extended Wi-Fi, and Network settings.
Click to change the login password, upgrade firmware, view data traffic statistics, save or load configuration
files, reboot, and restore the DAP-1520 back to the factory default settings.
Click to display the network settings of the wireless network (if connected) or to connect to a network if not
connected.
Displays the status of your connection to the wireless network you are "repeating". A green check mark (
indicates a successful connection to your wireless router or access point. A red (
Click the Uplink.Router icon to display a list of wireless networks you can connect the DAP-1520 to.
Click to view the details for both the uplink router network and the extended Wi-Fi network.
Click to display a list of clients (devices) currently connected to the DAP-1520.

Home Screen

2
6 7
"Setup Wizard" on page
3 4
8
18.
) indicates no connection.
)
26