Using The Wps Method - D-Link DAP-1520 User Manual

Section 3 - Configuration

Using the WPS Method

To set up using the WPS method, select the first option from the
setup wizard menu. Click Next to continue.
The DAP-1520 uses the push button method for WPS. After
selecting WPS, the DAP-1520 will ask you to press the WPS push
button on the access point or router you want to connect the
DAP-1520 to. You have 120 seconds to press the button on your
access point or router. Click Next to continue.
If a connection has been successfully made, you will see a notice
on the screen and the LED on the device will turn solid green.
D-Link DAP-1520 User Manual 18