PC Chips M909G Series User Manual page 62

Motherboard User's Guide
Auto-Installing under Windows 98/ME/2000/XP
If you are under Windows 98/ME/2000/XP, please click the Setup
button to run the software auto-installing program while the Auto
Setup screen pops out after inserting the support CD-ROM:
1 The installation program loads and displays the following
screen. Click the Next button.
2 Select the items that you want to setup by clicking on it
(the default options are recommended). Click the Next
button to proceed.
3 The support software will automatically install.
Once any of the installation procedures start, software is auto-
matically installed in sequence. You need to follow the onscreen
instructions, confirm commands and allow the computer to restart
as few times as needed to complete installing whatever software
you selected. When the process is finished, all the support soft-
ware will be installed and start working.
46