Pci/Plug And Play Setup Page - PC Chips M909G Series User Manual

PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the
PCI bus and those utilizing the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Primary Graphics Adapter
OnChip VGA Mode Select
Allocate IRQ to PCI VGA
PCI IDE BusMaster
Primary Graphics Adapter
This item indicates one of the three items; AGPro, OnChip VGA
or PCI can be the primary graphics adapter.
OnChip VGA Mode Select
This item provides the VGA mode with four options of 1MB,
8MB, Disabled or 512KB. We recommend you leave this item at
the default value.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA
graphics system. You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. We
recommend you to leave this item at the default value.
Chapter 3: BIOS Setup Utility
AGPro
1MB
Yes
Disabled
ESC:Quit
F1:Help
F5:Old Values
F6:Load Optimal Values
F7:Load Best Performance Values
37
:Select Item
PU/PD/+/-:Modify
(Shift)F2:Color