Xd-750/700/550/500 (En - Kenwood XD-500 Instruction Manual

Speaker (left)
3 3
Speaker Unit
1
Twist
1 1
The external view is variable depending on the model and
marketing destination type.
2 3
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around
the unit (from the largest outer dimensions including projec-
tions) equal to, or greater than, shown below.
left and right panels: 10 cm, rear panel: 10 cm, top panel: 50 cm
FM indoor antenna
The accessory antenna is for temporary indoor use only. For stable signal
reception we recommend using an outdoor antenna. Remove the indoor
antenna if you connect one outdoors.
1 Locate the position providing good reception condition.
2 Fix the antenna.
Front View
4
System connection

XD-750/700/550/500 (En)

Notes Notes
1. In case an associated system compo-
nent is connected, also read the instruc-
tion manual of the component.
2. Never short-circuit the + and – speaker
cords.
3. If the left and right speaker connections
or the + and – polarity are inverted, the
sound will be unnatural with unclear
positioning of musical instruments, etc.
Be sure to connect them without mis-
take.
Notes Notes
1. Be sure to insert all connection cords
securely. If their connections are imper-
fect, the sound may not be produced or
noise may interfere.
2. Before plugging or unplugging a con-
nection cord, be sure to unplug the
power cord from the wall AC outlet. If
connection cords are plugged or un-
plugged with the power cord left plugged
in, malfunction or damage may result.
7