Xd-750/700/550/500 (En - Kenwood XD-500 Instruction Manual

Component system/compact hi-fi system

Hide thumbs Also See for XD-500:

Instruction manual (57 pages)

Instruction manual (61 pages)

Instruction manual (56 pages)

Table Of Contents

Table of Contents

2 2

Relay play

When tapes are set in the decks A and B and the reverse mode is

set to "[" (play of both sides), play of the second deck will be

started automatically after play of the first deck has been com-

pleted. Tape play will be repeated alternately.

Relay play is not possible in the reverse modes """ and """.

A tip for use of the tape counter

The tape counter is set to "0000" when a cassette tape is loaded.

By writing down the counter reading in case you want to inter-

rupt recording (playback) in the middle of the tape, the memo

will be helpful as a reference for locating the same position when

continuing the recording (playback) the next time. The tape coun-

ter figure decrements during recording or playback of the back

side (while the 2 tape transport indicator is lit).

To set the tape counter to "0000", open the cassette holder once.

Then the counter will be reset.

BASS

ECHO

T A P E

) ) ) )

Let's put out some sound