Searching For The Desired Music Program (Dpss); Xd-750/700/550/500 (En - Kenwood XD-500 Instruction Manual

Searching for the desired music program
The DPSS (Direct Program Search System) is capable of detecting non-recorded spaces of more than 4 seconds as "blanks
between programs" and, based on this information, can return to the beginning of the music program being played or the
beginning of a desired program by skipping up to 16 other programs.
The DPSS may not function normally with the following kinds of tape.
Tapes containing several no-sound intervals of more than 4 seconds, such as conversation and talk tapes.
Notes Notes
Tapes containing pianissimo sections, such as classical music tape.
Tapes in which large noise is recorded in blanks between programs.
Tapes containing blanks between programs that are shorter than 4 seconds.
Tapes recorded at low level.
Tapes recorded by cross-fade recording (in which the beginning of next program is overlapped on the end of previous program).
During play in direction 3
To play the next program : Press once.
To play the 4th program
after the current program : Press 4 times.
2 7 3
1
To return to the beginning
of the current program : Press once.
To play the 4th program
before the current program : Press 5 times.
(DPSS)
To play the next program
To play the 4th program
after the current program
¡
To return to the beginning
of the current program
To play the 4th program
before the current program : Press 5 times.
Let's put out some sound

XD-750/700/550/500 (En)

During play in direction 2
: Press once.
: Press 4 times.
2 7 3
1 ¡
: Press once.
2 3