Connecting A Camcorder Or Additional Vcr; To Connect A Camcorder Or Additional Vcr; Can I Connect An Additional Vcr Permanently - Kenwood VR-4090 Connect And Set Up

Chapter One : Connecting Your Devices
PRO LOGIC 3 STEREO
VOLUME CONTROL
DOWN UP
AV AUX
S VIDEO VIDEO L - AUDIO - R

Connecting a Camcorder or Additional VCR

AUDIO OUT
VIDEO OUT
S-VIDEO OUT
This section focuses on the connections from your
camcorder or VCR to the front of the VR-4090/VR-4080/
KRF-V7773D. Please refer to your camcorder or VCR's in-
structions for more detail about its connection jacks and
capabilities.
These instructions describe how to connect a camcorder or
VCR quickly and probably temporarily to the front of the
receiver. If you want a less cluttered and more permanent
connection, see "Can I Connect an Additional VCR Perma-
nently?", below.

To Connect a Camcorder or Additional VCR:

Connect the audio and video cables from the camcorder or
VCR's Audio and Video jacks to the receiver's front panel
jacks as shown to the left.
Can I Connect an Additional VCR
Permanently?
Yes. To do so, follow the instructions under "To Connect a
Secondary VCR:" on page 13.
(or additional VCR)
29