Connecting Your Turntable/Record Player; To Connect A Turntable/Record Player - Kenwood VR-4090 Connect And Set Up

Chapter One : Connecting Your Devices
28
DIGITAL OUT
DVD
CD1
MD/
TAPE1
CD-R
VIDEO2
VIDEO3
VIDEO4
OPTICAL COAXIAL
DIGITAL IN

Connecting Your Turntable/Record Player

AUDIO OUT
GROUND
SIGNAL
GND
S VIDEO VIDEO R AUDIO L R AUDIO L PRE OUT
REC
OUT
VIDEO1
PHONO
PLAY
IN
CD1
REC
OUT
VIDEO2
REC
OUT
PLAY
IN
MD/ SURROUND
TAPE1
VIDEO3
PLAY
PLAY
IN
IN
REC
VIDEO4
OUT
PLAY
CD2/
IN
TAPE2
MONITOR
PLAY
DVD
IN
PLAY
IN
FRONT
REC
OUT
MONITOR
OUT
SURROUND
CD-R
PLAY
IN
CENTER SUBWOOFER
DVD/6 CH. INPUT
Do not plug in the receiver to AC power until you have
connected all your devices.
This section focuses on the connections from your turntable/
record player to the VR-4090/VR-4080/KRF-V7773D. Please
refer to your turntable/record player's instructions for more
detail about its connection jacks and capabilities.

To Connect a Turntable/Record Player:

1. Connect the audio cables from the turntable audio out-
put jacks to the receiver's PHONO R and L jacks.
2. If your turntable includes a ground cable, connect the
ground cable to the receiver's SIGNAL GND jack.
3. Go to "Noting Your Devices" on page 3 and note which
jacks you used to connect your turntable. In addition,
RF REMOTE ANTENNA
note the brand name and model number of the turn-
table.
FRONT
L ANTE
SYSTEM
CONTROL
R
SL 16
TEXT
L
R
CENTER
SUB
WOOFER