Noting Your Devices - Kenwood VR-4090 Connect And Set Up

Chapter One : Connecting Your Devices
Jack Set
Phono
CD1
MD/Tape1
CD2/Tape2 Monitor
CD-R
Monitor out
(TV on Remote Control unit)
Video1
Video2
Video3
Video4 (VR-4090 only)
DVD
Use this table and the diagram on the preceding page to
plan your connections before you make them, or use it to
record your connections as you make them.
For VR-4080/KRF-V7773D;
If you will be connecting a DVD player or other compo-
nent with a digital output, please refer to the following chart
before choosing a video jack set:

Noting Your Devices

Device Manufacturer
If your digital
cable is...
coaxial
optical
Model #
You will need this information later, when you set up your
Choose this jack
remote control unit (see "Identifying Components For Re-
set...
mote Control Unit" on page 38). Recording this informa-
tion now will save you additional trips behind your home
DVD, VIDEO2 or 3
entertainment cabinet. You will fill in the Setup Code col-
umn when you are setting up Remote Control Unit.
DVD
Setup Code
3