Kenwood VR-4090 Connect And Set Up page 47

Chapter Two : Setting Up the Remote Control Unit
To change the remote control signal from a Remote Con-
trol unit key (When you select "Nothing" in step 9 on page
39):
1. Select the controlled device (CD, DVD, etc.) by pressing
the Music, Movie or TV key.
Video1
DVD
Menu
2. Press the LEARN key.
3. On the Remote Control unit, press the key you want to
change the function.
Waiting
Clr Exit
Press the Exit key (LCD function key 2) to exit from the
operation.
4. On the Remote Control unit of the selected device, press
the key transmitting the desired remote control signal.
Complete is displayed when the remote control signal
has been programmed in this Remote Control unit.
Complete
5. To program other remote control signals, repeat steps 1
to 4 for each.
To reset a key to the factory shipment condition by clearing
the previously programmed signal:
Press the Clr key in step 3 of the procedure above. (Cleared
is displayed)
The remote control signal activated by holding the F.SHIFT
key cannot be changed.
In programming a remote control signal, be sure to use the
Remote Control unit originally provided with the AV de-
vice.
41