Connecting A Camcorder Or Additional Vcr - Kenwood VR-3100 Connection And Setup Manual

Chapter One : Connecting Your Devices

Connecting a Camcorder or Additional VCR

AUDIO OUT
VIDEO OUT
S-VIDEO OUT
Audio-Video Receiver VR-3100/VR-3090/KRF-V9992D
This section focuses on the connections from your
camcorder or VCR to the front of the VR-3100/VR-
3090/KRF-V9992D. Please refer to your camcorder or
VCR's instructions for more detail about its connec-
tion jacks and capabilities.
These instructions describe how to connect a
camcorder or VCR quickly and probably temporarily
to the front of the receiver. If you want a less
cluttered and more permanent connection, see "Can
I Connect an Additional VCR Permanently?", below.
To Connect a Camcorder or Additional
VCR:
Connect the audio and video cables from the
camcorder or VCR's Audio and Video jacks to the
receiver's front panel jacks as shown to the left.
Can I Connect an Additional VCR
Permanently?
Yes. To do so, follow the instructions under "To
Connect a Secondary VCR:" on page 13.
(or additional VCR)
2 7