Connecting A Camcorder Or Additional Vcr; To Connect A Camcorder Or Additional Vcr; Can I Connect An Additional Vcr Permanently - Kenwood KRF-X7775D Connection And Setup Manual

Chapter One : Connecting Your Devices

Connecting a Camcorder or Additional VCR

This section focuses on the connections from your
camcorder or VCR to the front of the KRF-X7775D. Please
refer to your camcorder or VCR's instructions for more de-
tail about its connection jacks and capabilities.
These instructions describe how to connect a camcorder or
VCR quickly and probably temporarily to the front of the
receiver. If you want a less cluttered and more permanent
CD2/TAPE2 CLIP
connection, see "Can I Connect an Additional VCR Perma-
MONITOR INDICATOR
nently?", below.

To Connect a Camcorder or Additional VCR:

Connect the audio and video cables from the camcorder or
VCR's Audio and Video jacks to the receiver's front panel
jacks as shown to the left.
VOLUME CONTROL
Can I Connect an Additional VCR
Permanently?
31
Yes. To do so, follow the instructions under "To Connect a
Secondary VCR:" on page 15.
DOWN UP
AV AUX
S VIDEO VIDEO L - AUDIO - R
(or additional VCR)
AUDIO OUT
VIDEO OUT
S-VIDEO OUT