Basic Playback - Akai AD 70H User Manual

Basic Playback

USB DRIVE PLAYBACK
Insert a USB drive into the USB slot. Press [USB] to enter the connected USB drive. Press it again to return to the
DVD mode.
NOTE:
In case the player breaks down when you insert a USB drive into the player, turn off the player, disconnect the
power cord from the AC outlet and unplug the USB drive from the player. Then, power on the player again. The
player will resume the normal status.
If there is no disc in the disc tray, the player will switch to the corresponding mode automatically after you plug in
a USB drive.
For playback operation, please refer to MP3/MPEG4 DISC PLAYBACK in this chapter.
During the playback of picture files, you need to press [MENU] or open the disc tray before switching between
DVD mode,and USB mode.
MP3/MPEG4 DISC PLAYBACK
Insert an MP3/MPEG4 disc into the player; a content menu will display on the screen.
MENU OPERATION:
Use the direction key [ ]/[ ] to select a folder or a file, then press [ENTER] to enter the selected folder or play the
selected file. You can also use the digit keys to make selection of a folder to enter or a file to play.
In the content menu, press [ ] to return to the upper menu; press [
the menu page.
[PROG]: Press repeatedly to switch between FOLDER playback mode and FILELIST playback mode in the content
menu.
[MENU]: During playback of an MPEG4 disc, press to return to the content menu.
NOTE: During playback, [ ], [ ], [
are valid. Please refer to the REMOTE CONTROL FUNCTION chapter for details.
], [ ](press to stop the playback), [REPEAT], [A-B], [VOLUME+/-], [MUTE], etc.
-22-
]/[ ] to return/proceed to the previous/next