Remote Control - Akai AD 70H User Manual

Remote Control Operation
Insert two AAA/1.5V batteries into the remote control. Point the remote control at the remote sensor
on the front panel. The remote control works within a distance of about 8 metres from the sensor and
within an angle of about 30 degrees from the left and right side.
Battery Installation
1
Remove the battery
compartment cover on
the back of the remote
control.
Note:
Remove the batteries when you do not intend to use the remote control for a long time.
Do not mix new and used batteries, or different types of batteries.
Weak batteries can leak and severely damage the remote control.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Be environmentally friendly and dispose of batteries according to your government regulations.
2
Load the batteries into the battery
compartment making sure that the
batteries have been inserted with the
correct polarities matching the symbols +,
- as indicated inside the battery
compartment.
-17-

Remote control

3
Replace the cover.