Akai AD 70H User Manual page 28

Hide thumbs Also See for AD 70H:

Table of Contents

Available languages

2.2.2 LPCM OUTPUT

When DIGITAL OUTPUT is set to SPDIF/PCM, this item is available.

Select a sample rating for the digital audio output. There are two options, 48KHz and 96KHz.

NOTE: Some amplifiers don't support 96KHz sampling which will affect the coaxial output.

2.3 CHANNEL DELAY

This item is used to set the delay time for the center speaker, rear speakers and the subwoofer. The delay is to

compensate for the audio propagation time difference caused by the distance difference of the speakers to the

listener.

Use the direction key [ ]/[ ] to select the center speaker, subwoofer, left surround speaker or right surround

speaker.

Then use the direction key [ ]/[ ] to set the distance difference.

0cm

Sub

Woofer

NOTE:

The unit does not support delays when the distance between the center or surround

speakers and the listener are longer than that between the front speakers and the

listener.

In case the channel delay settings cannot match your speaker configuration, please

set all distance difference to 0cm. If possible, use your receiver/amplifier to set the

channel delay.

-11-

System Setup

Table of Contents