Table of Contents
Advertisement
Available languages
Available languages
STANDBY
Press to switch on the unit. Press it again to put the unit in standby mode.
Note: Being in the standby mode uses a minimal amount of electricity, but ensures that the
components of the unit operate at maximum efficiency from the moment you start.
DEFAULT
When the disc tray is open or the disc is stopped, press to restore the default settings except the
settings in PASSWORD item and PARENTAL item.
OPEN/CLOSE
Press to open /close the disc tray.
1
2
3
The digit keys can be used to input numbers or make selection of a track or a chapter, etc.
4
5
6
7
8
9
0/10
10+
Press to enter the selected item in the menu or to confirm and execute a selection.
ENTER
ENTER
The direction keys can be used to move the highlight in the menu.
SETUP
Press to enter/exit the setup menu.
GOTO
During playback, press to enter the GOTO menu. In the menu, use the direction key [ ]/[ ] to select
a setting item and press [ENTER] to enter the editing state, then with the digit keys input a specific
track, disc time, track time, chapter, title, chapter time or title time to go to directly. Press it again to
exit the GOTO menu.
PROGRAM
Press this button to enter/exit the program menu with which you can playback the contents of a disc
in your desired order.
In the program menu, use the direction keys and digit keys to program a playback list, then move the
highlight to 'START' and press [ENTER] to start program playback.
During program playback, press [PROG] to enter the program menu. Now, 'STOP' is highlighted. Press
[ENTER] to cancel the current program playback.
Press to temporarily pause a playback. Press it again to resume the playback.
Or, press to resume the normal playback from the fast forward, fast reverse, frame-by-frame, slow-
motion playback, etc.
Remote Control Function
-19-
Advertisement
Table of Contents
