System Setup; General Setup Page - Akai AD 70H User Manual

System Setup

Menu Operation
1. Press [SETUP] on the remote control to show the setup menu.
2. Press [ ]/[ ] to select an item. The submenu of the selected item will be displayed below instantly.
3. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] /[ ]to enter. Use [ ]/[ ] to
select an option, then press [ENTER] to confirm it, or press [ ] to cancel.
4. Then you can press [ ]/[ ] to continue to set other items in the submenu.
5. Press [ ] to go back to the superior menu of the current one.
6. Press [SETUP] again to exit the setup menu.

1 GENERAL SETUP PAGE

1.1 TV DISPLAY
If the unit is connected to a conventional TV set, select 4:3 PANSCAN or 4:3 LETTERBOX. The 4:3 image will be
displayed in full screen in its native aspect ratio.
4:3 PANSCAN: The wide-screen image will be displayed on the screen in its native aspect ratio with some part on
the left and right cut off.
4:3 LETTER BOX: The wide-screen image will be displayed in its native aspect ratio with black bands on the upper
and lower sections of the screen.
If the unit is connected to a wide-screen TV set, select 16:9 or WIDE SQUEEZE.
16: 9: The wide-screen image will be displayed in full screen in its native aspect ratio while the 4:3 image will be
stretched out horizontally to fit in the screen.
WIDE SQUEEZE: The wide-screen image will be displayed in full screen in its native aspect ratio and so does the
4:3 image but with black borders on the left and the right side.
1.2 ANGLE MARK
Set this item to ON. When a disc with multiple camera angles is playing, the angle mark will display on the screen.
Then you can view the video of different camera angles by pressing [ANGLE] on the remote control.
Set this item to OFF to disable this function.
NOTE: This function only works with those discs encoded with multiple camera angles.
-8-