Mounting Tips - OCI OCIE48EH Installation & Operation Manual

MOUNTING TIPS

The heater may be mounted at a 0 degree angle or at a maximum of a 30 degree
angle in reference to the floor. The heater must always be horizontal to the floor.
WARNING: Mounting the heater at greater than a 30 degree angle will
cause improper flue exhaust of combustion gases which may result in dam-
age to the front grill and will overheat the electronic control.
NOTE: Use only the mounting brackets provided by the manufacturer. Heater must
be leveled only on a horizontal axis but can be angled to a maximum of 30 degrees
in reference to the floor. DO NOT mount the heater on a vertical axis. Such instal-
lation is considered unsafe and improper and will automatically VOID the product's
warranty. Any modification to heater brackets could void the factory warranty
of the heater!
Clearance around the heater must be maintained to prevent fire hazard and to allow
proper ventilation of the heater. Heater must be in a location that allows uniform air
pressure around the entire heater.
9