Various Cd (Cd-Da,Video Cd And Mp3 File) Playback Features; Listening To The Desired Sequence - Kenwood HM-353V Instruction Manual

Various CD (CD-DA, VIDEO CD and MP3 file) playback features
28
Symbols
CD-DA VIDEO CD MP3 file

Listening to the desired sequence

Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
A non-finalized CD-R cannot be played back.
Select the CD input.
1
Let the "PGM" indicator light.
Press in stop mode
2
Select track numbers in the order you want to play them.
1
Select the track.
1
4
7
10
2
(Go to step within 4 seconds.)
2
Confirm the selection.
(To select more than one track, repeat steps 1 and
2 for each track.)
3
Start playback.
in the text indicate the disc media that can be played back.
AUTO/ / MONO
PGM
2 3
5 6
8 9
0
SET
CD
SELECT
(PGM )
CD-DA VIDEO CD (with PBC OFF *)
Lights
P G M C D
Selection of tracks
P G M C D
Press the numeric keys as shown below....
To select track No. 23
To select track No. 40
÷ A track can also be selected using the 4 or ¢ key.
÷ Up to 32 tracks can be programmed. When "FULL" is dis-
played, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
÷ When the total time of CD program is 256 minutes or
more, the time display shows " - - : - - ".
÷ Tracks will be played in the order they were pro-
grammed (following the program numbers).
÷ When the 4/ ¢ key is pressed during play, the pro-
gram will jump to the preceding or the following track
respectively.
Various CD playback features
Program position of the track
to be selected next.
: +10 2, 3
X
: +10 4, 0
X