Receiving Broadcast Station - Kenwood HM-353V Instruction Manual

Receiving broadcast station

Up to 30 radio stations can be preset in memory.
When the TUNER FM/AM key is pressed, the unit will automatically be switched on and reception status will be
reached.
One-by-one preset-
ting (2,4) ∞
One-by-one pre-
setting (3) ∞
TUNER
FM/AM
4
3 3
Tuning a non-preset
radio station (2) ∞
Tuning a
non-preset
radio station
(1) ∞
1. Select the tuner input.
1 1
Each press of the TUNER FM/AM key switches the band as follows.
FM
AM
2. Preset a radio station in memory.
Collective presetting of stations (auto preset) ¢
Follow the procedure in "Collective presetting of stations (auto preset)"
to preset automatically the tunable radio stations in your area.
÷ Once stations are stored by auto presetting, the present procedure is
not required from the next time, unless you move of house or re-ex-
ecute presetting of all tunable stations.
One-by-one presetting (Manual preset) ∞
A station can also be tuned even when it is not preset. For details, read
"Tuning a non-preset radio station (Auto tuning, Manual tuning)".
3. Tuning (Preset Call)
÷ If radio stations have already been
stored with auto preset or manual
preset, select a station using the
4, ¢ key. Each press of the
¢
same key switches the preset stations
in sequence.
When ¢ is pressed : 1=2=3 ... 28=29=30=1...
When 4 is pressed : 30 = 29 = 28 ..... 3 = 2 = 1 = 30.....
÷ When a key is held depressed, preset stations will be skipped at an interval
of about 0.5 second.
÷ To select a preset station from the remote, use the 4 P.CALL ¢ key or
numeric keys.
÷ Preset stations can be called using the number key on the remote control.
1 1
3 3
The "TUNED" indicator lights
when a station is received
Collective presetting of
stations
Lights during stereo reception
Frequency display
23