Recording On Tape - Kenwood HM-353V Instruction Manual

Recording on TAPE

26
The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on
Metal (Type ) tapes.
Stop the recording
0
push open
1 1
TAPE
2
Stop the recording
1. Load a tape in deck.
1 Press the area marked 0 push open to open the cassette
holder.
2 Insert a tape.
3 Press the area marked 0 push open to close the cassette
holder.
Do not use a cassette with more than 90-minute recording time, for the
tape used in such a cassette is very thin and tends to cause problem such
as entanglement around the pinch roller or could be easily cut off.
÷ Remove tape slack before loading.
2. Select the tape transport direction.
To reverse the transport direction :
1
Press the TAPE 2 3 key corresponding to the desired direc-
3
tion.
2
Press the 7 STOP key to stop playback.
÷ When recording is started, the tape is transported in the direction selected
2 2
in this step.
Check the tape transport direction indicator.
÷ Search the position you want to start recording in advance.
2 2
4 4
5 5
1 1
Start recording/ Pause the recording
Recording on TAPE
3 3
¡