Problem Solving Guide - Miele KM 5801 Operating And Installation Instructions

Problem solving guide

With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation can be put right
without contacting the Service Department.
,
Installation work and repairs to electrical appliances must only be carried
out by a suitably qualified and competent person in strict accordance with
current local and national safety regulations (BS 7671 in the UK). Repairs and
other work by unqualified persons could be dangerous. The manufacturer
cannot be held liable for unauthorised work.
Problem
The hob or cooking
zones cannot be
switched on.
44
Possible cause
The system lock is
activated.
The mains fuse has tripped. Reset the trip switch in the
There may be a technical
fault.
Remedy
Deactivate the system lock
(see "Safety lock / System
lock").
mains fuse box (minimum
fuse rating - see data
plate).
Disconnect the appliance
from the electricity supply
for approx. 1 minute.
– switch off at the wall
socket and withdraw the
plug, or
– switch off at the isolator,
or
– disconnect the mains
fuse.
Reset the trip switch in the
mains fuse box, and switch
the appliance back on. If it
still will not switch on,
contact a qualified
electrician or the Miele
Service Department.