Programming - Miele KM 5801 Operating And Installation Instructions

To call up programming mode
To set the programme setting
To set the status setting
To save settings
To not save settings
You can change the default settings of programme options
(see chart). Several settings can be altered in succession.
After programming mode has been called up, P (Programme)
and S (Status) will appear in the timer display. On hobs with 3
cooking zones, an additional indicator will appear at the rear
left.
The programme is shown in the cooking zone displays at the
front left and rear left. Example:
Programme 03 = front left 0, rear left 3
Programme 14 = front left 1, rear left 4
The status is shown in the front right cooking zone display.
^ With the hob switched off, touch the s and $ sensors at
the same time until the safety lock indicator lamp flashes.
^ To set the units position first touch the sensor for selecting
the rear left cooking zone and then touch the relevant
number on the numerical keypad.
^ To set the tens position first touch the sensor for selecting
the front left cooking zone and then touch the relevant
number on the numerical keypad.
^ Touch the sensor for selecting the front right cooking zone
and then touch the relevant number on the numerical
keypad.
^ Touch the s sensor until all the displays go out.
^ Touch the $ sensor until all the displays go out.

Programming

41