Ford 2013 C-MAX ENERGI Owner's Manual page 257

256
Removing the Jumper Cables
Note: In the illustration, the vehicle on the bottom is used to designate
the assisting (boosting) battery.
Remove the jumper cables in the reverse order that they were
connected.
4
+
-
2
-
+
After the cables have been removed from both vehicles replace the red
cap to the positive (+) prong . After the disabled vehicle has been
started and the jumper cables removed, allow it to idle for several
minutes so the engine computer can relearn its idle conditions.
2013 C-Max Full Hybrid (34h)
Owners Guide gf, 2nd Printing
USA (fus)
Roadside Emergencies
1. Remove the jumper cable from
the negative (-) prong on your
vehicle's battery.
2. Remove the jumper cable on the
negative (-) terminal of the booster
vehicle's battery.
3. Remove the jumper cable from
the positive (+) terminal of the
booster vehicle's battery.
1
4. Remove the jumper cable from
the positive (+) prong of your
vehicle's battery.
3