barigo PENTA Operating Instructions Manual page 9

Watch mode
Pressing the following buttons has the following functions in the
watch mode:
S1 – press and hold to set the time
S2 – to go to the altimeter mode
S3 – to go to the compass mode
S4 – to go to the alarm mode
S5 – to go to the weather forecast
Setting the time
The following steps are required for setting the time in the watch
mode:
1. Press the S1 button for two seconds until you hear a double
signal tone. The minute hand in A1 will change to the 12-o'clock
position, while the second hand A5 will move to the 60 second
position. – Continue with point 3.
2. If the second hand does not automatically move to the 60-
second position (12 o'clock), press the S2 button in order to ma-
nually move it to this position (to move forward faster = keep
BARIGO – Makes
the Difference
9