barigo PENTA Operating Instructions Manual page 26

PENTA
Pressing the following buttons has the following functions in the
alarm mode:
S1 – to go to the current time mode
S2 – to go to the altimeter mode
S3 – to go to the compass mode
S4 – to turn the alarm ON/OFF
S5 – to go to the weather forecast
The BARIGO PENTA automatically leaves the alarm mode after 30
seconds by changing the display to the current time. After resetting
the BARIGO PENTA, the alarm is preset to OFF. The maximum
length of the alarm signal tone is 20 seconds.
To turn off the alarm signal tone, press any button, however, without
activating any other button function. In the time setting, compass
calibration and alarm setting modes, the alarm signal tone is dis-
abled.
26
Alarm