barigo PENTA Operating Instructions Manual page 23

Compass
1. Press the S3 button for two seconds until you hear a double
signal tone. The indicator A5 will automatically move to the
"zero" position (= N/360°). If the indicator is not at the zero posi-
tion, continue to the next step.
2. Press S2 to set the indicator A5 to the zero position. To move
quicker, hold the S2 button.
3. Place the BARIGO PENTA on a level surface and rotate the
BARIGO PENTA 360° twice within 30 seconds.
4. To exit the calibration mode, press the S3 button. The BARIGO
PENTA automatically leaves the calibration mode after a minute
and changes to the compass mode.
BARIGO – Makes
the Difference
23