barigo PENTA Operating Instructions Manual page 10

PENTA
pressing S2, to move forward in seconds = press S2 repetitive-
ly).
3. Press the S1 button (single signal tone) for the next step.
4. Press the S2 button for AM or PM.
5. Press the S1 button (single signal tone) for the next step.
6. Press the S2 button to set the current time. To move quicker,
hold S2.
7. Press the S1 button (double signal tone) to complete the setting
mode for the time.
The BARIGO PENTA automatically leaves the setting mode if no
button is pressed for 2 to 3 minutes. We recommend moving the
second hand in the setting mode to the 60-second position to get an
exact time setting.
Tip: We recommend setting the BARIGO PENTA to a time signal (for example,
radio or television). Prepare for the time setting of your BARIGO PENTA so that
you just have to press the S1 button to complete the setting mode when the
time signal rings in the radio or television (normally on the hour).
10
Watch mode