The Reset Mode - barigo PENTA Operating Instructions Manual

PENTA

The reset mode

The following steps should be executed to return the BARIGO
PENTA to factory settings:
The settings in the reset mode occur according to the following
sequence:
1. You can reset the BARIGO PENTA by simultaneously pressing
the S1, S2, S3, S4 and S5 buttons. Here it does not matter which
mode the BARIGO PENTA is currently in. You will hear a long
signal tone and all indicators will stop.
2. Press the S1 button to set the indicator A5
clockwise to the position N/360°. To move
quicker, hold the S1 button. By pressing the S3
button, you can move the indicator counter-
clockwise. Hold the S3 button to move quicker
in a counterclockwise direction.
30
A5  A4  A1  A2  A3
Reset