barigo PENTA Operating Instructions Manual page 13

Altimeter
Pressing the following buttons has the following functions in the
altimeter mode:
S1 – to go to the current time mode
S2 – press and hold for the altimeter setting mode
S3 – to go to the compass mode
S4 – to go to the alarm mode
S5 – to go to the weather forecast
Calibration mode for the altimeter
In Altimeter mode, do the following steps:
1. Press and hold S2 for 2 seconds (Dual tone). A1 shows the
current time. A2 shows the temperature. A3 will indicate local
altitude x 1 km. A4 shows the weather forecast. A5 will move
close to 60 seconds position.
2. Press S1 to adjust A5 hand to move to 60 seconds position.
BARIGO – Makes
the Difference
13