How To Use This Manual - Kenwood VR-6060 Instruction Manual

Before applying the power

How to use this manual

This manual is divided into four sections, Preparations, Operations,
Remote Control, and Additional Information.
Preparations
Shows you how to connect your audio and video components to the
receiver and prepare the surround processor.
Since this receiver works with all your audio and video components, we
will guide you in setting up your system to be as easy as possible.
Operations
Shows you how to operate the various functions available on the
receiver.
Remote Control
Shows you how to operate other components using the remote control,
as well as a detailed explanation of all remote control operations. Once
you have registered your components with the proper setup codes, you'll
be able to operate both this receiver and your other AV components (TV,
VCR, DVD player, CD player, etc.) using the remote control supplied with
this receiver.
Additional Information
Shows you additional information such as "In case of difficulty" (trouble-
shooting) and "Specifications".
Memory back up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 2 days.
• Power mode.
• Input selector settings.
• Device preset.
• Picture output.
• Speaker ON/OFF.
• Volume level.
• BASS, TREBLE, INPUT level.
• TONE ON/OFF.
• LOUDNESS ON/OFF.
• Subwoofer ON/OFF.
• Dimmer level.
• MD/TAPE settings.
• RF-BAND. (VR-609 only)
• 6ch/2ch input setting.
• Listen mode setting.
4
EN
•VR609/01-09/EN new
• Speaker settings.
• SW RE-MIX.
• Distance setting.
• Input mode setting.
• Midnight mode setting.
• PRO LOGIC II mode setting.
• Broadcast band.
• Frequency setting.
• Preset stations.
• Tuning mode.
• Source Direct.
• CINEMA EQ.
• ACTIVE EQ.
• DSP mode.
4
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may
cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction. Be
specially careful not to use contact cleaners containing oil, for they
may deform the plastic component.
10/24/01, 10:33 PM