Connecting The Speakers - Kenwood KRF-V8010D Instruction Manual

Connecting the speakers

12
1 Strip coating.
3 Insert.
Front Speakers A
Right
R
+
-
FRONT SPEAKERS
CENTER
L
R
SUBWOOFER SURROUND
PRE OUT
Use the FRONT
SPEAKERS B
terminals if you
want to connect a
second front
speaker system.
Powered
subwoofer
2 Loosen.
4 Secure.
Left
Center Speaker
L C
+
-
A
CENTER SPEAKER
FRONT SPEAKERS
R L
B
+ - - +
+ - - +
R L
SURROUND SPEAKERS
Right
Surround Speakers
(Be sure to connect both
surround speakers)
Speaker impedance
FRONT SPEAKERS A or B ....................................................... 4-16
FRONT SPEAKERS A and B .................................................... 8-16
CENTER SPEAKER .................................................................... 4-8
SURROUND SPEAKERS ............................................................ 4-8
for Australia only
Speaker impedance
FRONT SPEAKERS .................................................................. 8-16
CENTER SPEAKER .................................................................. 8-16
SURROUND SPEAKERS .......................................................... 8-16
PRE OUT connections
This receiver has additional preout jacks. These can be used for
various purposes, but will need to be connected to an external power
amplifier as shown in the example below.
CENTER
SUBWOOFER SURROUND
PRE OUT
• Connecting a speaker cord directly to a PRE OUT jack will not
produce any sound from the speaker.
• To use the PRE OUT jacks, press the SPEAKERS A key to the on
position.
Left
Setting up the system
L
Power amplifier
R
Power amplifier
KRF-V8010D (En/T)
Surround
Speakers
Powered
Subwoofer
Center Speaker