Connecting The Speakers - Kenwood KRF-V5050D Instruction Manual

Connecting the speakers

1 Strip coating.
3 Insert.
1 Strip coating.
3 Insert the cord.
2 Loosen.
4 Secure.
2 Push the lever.
4 Return the lever.
• Never short circuit the + and – speaker cords.
• If the left and right speakers are connected inversely or the speaker
cords are connected with reversed polarity, the sound will be unnatu-
ral with ambiguous acoustic imaging. Be sure to connect the speak-
ers correctly.
Speaker impedance
After confirming the speaker impedance indications printed on the rear
panel of the receiver, connect speakers with matching impedance
ratings. Using speakers with a rated impedance other than that indi-
cated on the rear panel of the receiver could result in malfunctions or
damage to the speakers or receiver.
Setting up the system
15