Connecting The Speakers - Kenwood KRF-V5100D Instruction Manual

Setting up the system

Connecting the speakers

Front Speakers
Right
FRONT
R
RED
SUB WOOFER
PRE OUT
Powered
Subwoofer
To make sure that each speaker has been connected properly, pay attention to the test tone from each speaker.
Refer to "6 Adjust the speaker volume level .".
14
EN
Left
Center
Speaker
CENTER
+
-
L
WHITE GREEN
SPEAKERS
Right
Surround Speakers
Surround Back Speakers
Left Right
Power Amplifier
*
KRF-V6100D:
L
SURR BACK
/SURR BACK
*
L
SURR BACK
KRF-V6100D only
When using both
Surround Back Left
and Right speakers,
select "PRE OUT"
R
SURR BACK
at speaker settings.
PRE OUT
KRF-V6100D
SURROUND
SURROUND
BACK
+
-
R L
GRAY BLUE BROWN
Left
Surround
Back Speaker
KRF-V6100D
Surround Back Speaker
Power Amplifier
L
SURR BACK
/SURR BACK
R
SURR BACK
PRE OUT
When connecting a single
&
Surround Back speaker
through a power amplifier to
PRE OUT SURR BACK L/
SURR BACK jack, connect it
as above and
"SPEAKER" at speaker set-
tings.
KRF-V5100D
SURROUND
R L
GRAY BLUE
When connecting a Surround
Back speaker to this terminal,
select "SPEAKER" at speaker
&
settings.
*
select
&
+
-