Operations Listening To Radio Broadcasts; Tuning (Non Rds) Radio Stations; Using Rds (Radio Date System) - Kenwood KRF-V8010D Instruction Manual

Listening to radio broadcasts

Tuning (non RDS) radio stations

18
Radio stations can be classified into RDS (Radio Data System) stations
and other stations. To listen to or store RDS stations in the preset
memory, see the section entitled, "Using RDS".
MULTI CONTROL
AUDIO
(AUTO)
TUNING/SKIP
1
Use the input selector to select the tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band
as follows:
1 FM
2 AM
3
Use the AUTO key to select the desired tuning method.
Each press switches the tuning method as follows:
1 AUTO lit (auto tuning)
2 AUTO not lit (manual tuning)
• Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL (TUNING/SKIP) to select the
station.
- -
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob (press the key) to select the
desired station.
AUTO
BAND
INPUT SELECTOR
BAND
"AM" or "FM" indicator
7 . 5)
FM
MHz STEREO
7 . 5)
FM
MHz STEREO
Frequency Lights when a broadcast is
display
being received in stereo.
8 )) 9 .
FM
STEREO
MHz
"TUNED" is displayed
when a station is received
Using RDS (Radio Data System)
RDS is a system that transmits useful information (in the form of digital
data) for FM broadcasts along with the broadcast signal. Tuners and
receivers designed for RDS reception can extract the information from
the broadcast signal for use with various functions, such as automatic
display of the station name.
RDS functions:
PTY (Program Type Identification) Search
Automatically tunes to a station that is currently broadcasting the
specified program type (genre).
EON (Enhanced Other Network) reservation
Sets the tuner to automatically switch to stations broadcasting one of
two types of programs, even though you are listening to another
station. The tuner returns to the original station when the broadcast
of the selected program ends.
PS (Program Service Name) Display
Automatically displays the station name transmitted by the RDS
station.
RDS Auto Memory function
Automatically selects and stores up to 30 RDS stations in the preset
memory.
If fewer than 30 RDS stations have been stored in the preset memory,
regular FM stations will be stored in the remaining places.
Radio text function
Displays the radio text data transmitted by some RDS stations when
you press the DISPLAY key. There is no display if no text data was
transmitted.
The "RDS" indicator lights up when an RDS broadcast (signal) is
received.
AUTO
MEMO.
ST.
TUNED
A B TI.VOL
SP
RDS EON PTY
TP TA NEWS
Note
AUTO
MEMO. Some functions and function names may differ for certain countries
ST.
and areas.
TUNED
Before using a function utilizing the RDS, be sure to perform the RDS
Auto Memory operation by referring to the description in "Presetting
RDS stations (RDS AUTO MEMORY)".
AUTO
MEMO.
ST.
TUNED
KRF-V8010D (En/T)
- - 9 5) 2 .
FM AUTO SOUND DIGITAL
PRO LOGIC
AM
STEREO
MHz
kHz DOWNMIX
)
¡
(
AUTO
S.DIRECT MEMO.
MONITOR ST.
TUNED
DSP
(