Kenwood KRF-V8010D Instruction Manual page 22

Setting the volume while receiving information (TI volume)
22
If you preset the volume level, you can listen to the information of your
choice at that volume level automatically. After the information has
been received, the volume returns to the previous level.
1 Hold down the TA/NEWS key for more than two seconds so that
the "TI.VOL" indicator starts blinking.
T I -5 dB
SP A B TI.VOL
MUTE MUTE
RDS EON PTY
TP TA NEWS
2 Use the VOLUME CONTROL knob to select the desired volume
level.
Proceed to next step within five seconds.
3 Press the TA/NEWS key to enter the new setting.
• The "TI.VOL" indicator stops blinking and remains lit.
• This function is not valid when the set volume is lower than the
original volume.
Canceling TI volume
Hold down the TA/NEWS key for more than two seconds so that
the "TI.VOL" indicator goes off.
Listening to radio broadcasts
)
AUTO SOUND DIGITAL AUTO
FM
AM PRO LOGIC S.DIRECT MEMO.
MHz STEREO MONITOR ST.
kHz DOWNMIX DSP TUNED
Blinks
KRF-V8010D (En/T)