Switching on and off
Before using for the first time
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
^ Press the On/Off button.
The appliance will start to cool.
The temperature display and the alarm
symbol ; will flash until the
temperature in the freezer is cold
To enable the temperature to get
sufficiently cold inside the
appliance, allow it to run for a few
hours before placing food in it.
Do not place food in the appliance
until the temperature is at least
^ Press the On/Off button until the
display goes out.
The cooling system is switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
^ switch the appliance off,
^ disconnect it from the mains,
^ clean the appliance out and
^ leave the door ajar to air it.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the