Switching On And Off - Miele CM 6100 Operating Instructions Manual

Switching on and off

Switching on
Switch the master switch on the left
hand side of the machine to the "I"
position.
^ Touch the On/Off sensor -.
The appliance will begin rinsing after
the heating-up phase. Hot water will
come out of the central spout.
If the coffee machine still has an
operating temperature higher than
60 °C , then rinsing will not take
place.
"Select type of drink" will appear in the
display.
If you do not touch any sensors or
run the maintenance programme, the
display will switch itself off after
approx. 7 minutes to save energy.
The right hand LED will flash on and
off as long as the machine is
switched on.
Touch any one of the sensors to
wake the machine up again to make
a drink.
20
Switching off
^ Touch the On/Off sensor -.
If the coffee machine has been used for
making a drink it will rinse itself before
switching off.
If a drink has been made using milk,
the message "Place milk pipework in
drip tray" will appear in the display.
Insert the end of the milk pipe into the
aperture in the drip tray, then
^ Touch OK.
If the milk system is not rinsed out
before switching off, it will have to be
rinsed the next time the machine is
switched on.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a longer period of time:
^ Empty the drip tray, the waste
container and the water container.
^ Clean all parts thoroughly, including
the brew unit.
^ Switch the machine off with the
master switch and at the wall socket.
The time of day will not be saved. It will
have to be reset next time the machine
is switched on.