Names And Functions Of Parts; Main Unit - Kenwood KRF-V4060D Instruction Manual

Names and functions of parts

Main Unit

CINEMA EQ. indicator
Speaker indicator
CLIP indicator
RDS indicators
TONE indicator
LOUDNESS indicator
96kHzfs indicator
POWER
STANDBY STANDBY
ON ⁄ STANDBY ON ⁄ STANDBY
SPEAKERS ON ⁄ OFF
POWER
ON OFF
PHONES
For VR-605/
615
1 POWER ON/OFF key
(For KRF-V5060D/V4060D/V5560D)
Use to turn the main power ON/OFF.
2 ON/STANDBY (
) key
(For KRF-V5060D/V4060D/V5560D)
Use to switch the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
2 POWER ON/STANDBY (
(For VR-605/615)
Use to turn the power ON/STANDBY.
STANDBY indicator
3 DIMMER key
Use to select the REC MODE.
Use to adjust the brightness of the display.
4 LISTEN MODE key
Use to select the listening mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to
the system to back-up the memory. This is called standby mode. Under
the condition, the system can be turned ON by the remote control unit.
MUTE indicator
Speaker selection indicators
Input channel indicators
Output channel indicators
DIMMER LISTEN MODE DSP DTS DOLBY DIGITAL
CINEMA EQ INPUT MODE BAND AUTO
5 Surround indicators
&
DSP mode indicator
Lights when the receiver is in the DSP mode.
&
DTS mode indicator
Lights when the receiver is in the DTS mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby
Digital mode.
6 SOUND key
) key
&
Use to adjust the sound quality and the ambi-
ence effects.
7 MULTI CONTROL knob
Use to control a variety of settings.
8 INPUT SELECTOR knob
¡
Use to select the input sources.
9 VOLUME CONTROL knob
º
0 PHONES jack
•
Use for headphone listening.
Frequency display,
Input display,
Preset channel display,
Surround mode display DTS indicator
Band indicators
DOLBY DIGITAL
indicator
PRO LOGIC
indicator
Display
MULTI CONTROL
SOUND
MEMORY
SET UP
Connection at POWER ON/OFF key (for KRF-V5060D/V4060D/
V5560D)
The power in this equipment will not be completely cut off from the AC
wall outlet when the main switch is turned OFF.
AUTO DETECT
indicator
6CH INPUT indicator
DIGITAL indicator
DSP indicator
STEREO indicator
VOLUME CONTROL
DOWN
INPUT SELECTOR
! SPEAKERS ON/OFF keys
•
Use to turn the speakers ON/OFF.
@ CINEMA EQ key
•
Use to switch the status of CINEMA EQ.
# INPUT MODE key
•
Use to switch between full auto, digital and
analog inputs.
$ BAND key
ª
Use to select the broadcast band.
% AUTO key
Use to change "TAPE" indication to "MD".
&
Use to select the auto tuning mode.
^ MEMORY key
(
Use to store radio stations in the preset
(
memory.
& SET UP key
)
Use to select the speakers' settings etc.
* MUTE key
Use to temporarily mute the sound.
AUTO indicator
MEMO. indicator
ST. indicator
TUNED indicator
UP
MUTE
(
)
8
™
(
™
£
&
)
5 EN