Table of Contents
Advertisement
S e t t i n g s
Do not point the IR (infrared) beam
at anyone's eye or allow it to
interfere with other IR devices. This
device is a Class 1 laser product.
When sending or receiving data,
ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions between
the devices.
To activate the IR port of your phone
to receive data using IR, select
Menu
>
Settings
Infrared.
To deactivate the IR connection,
select
Menu
>
Settings
Connectivity
> Infrared. When the
phone displays
Deactivate
select Yes.
If data transfer is not started within
2 minutes after the activation of the
IR port, the connection is cancelled
and must be started again.
IR connection indicator
When
is shown continuously,
the IR connection is activated, and
your phone is ready to send or
receive data through its IR port.
When
blinks, your phone is
trying to connect to the other
device, or a connection has been
lost.
40
>
Connectivity
>
>
infrared?,
Copyright © 2006 Nokia. All rights reserved.
Packet data (EGPRS)
Enhanced general packet radio
service (EGPRS), packet data, is a
network service which allows mobile
phones to send and receive data over
an Internet protocol (IP)-based
network. It enables wireless access to
data networks such as the Internet.
The applications that may use packet
data are MMS, browsing sessions,
e-mail, remote SyncML, Java
application downloading, and the PC
dial-up.
To define how to use the service,
select
Menu
>
Settings
Connectivity
>
Packet data
data
connection.
Select
When needed
data connection to be established
when an application needs it. The
connection will be closed when the
application is terminated.
Select
Always online
phone to automatically connect to
an packet data network when it is
switched on.
indicates a packet data
connection.
Modem settings
You can connect the phone using an
IR or a data cable (CA-42) connection
to a compatible PC, and use the
phone as a modem to enable packet
data connectivity from the PC.
>
>
Packet
to set the packet
to set the
Advertisement
Table of Contents
