Packet Data (Egprs) - Nokia 6070 User Manual

S e t t i n g s
Do not point the IR (infrared) beam at
anyone's eyes or allow it to interfere
with other IR devices. Infrared devices
are Class 1 laser products.
When sending or receiving data,
ensure that the IR ports of the sending
and receiving devices are pointing at
each other and that there are no
obstructions between the devices.
To activate the IR port of your phone to
receive data using IR, select
Settings > Connectivity
To deactivate the IR connection, select
Menu > Settings > Connectivity
Infrared. When the phone displays
Deactivate infrared?, select Yes.
If data transfer is not started within 2
minutes after the activation of the IR
port, the connection is canceled and
must be started again.
IR connection indicator
When is shown continuously, the
IR connection is activated, and your
phone is ready to send or receive data
through its IR port.
When blinks, your phone is trying
to connect to the other device, or a
connection has been lost.
40 Copyright © 2006 Nokia. All rights reserved.

Packet data (EGPRS)

Enhanced general packet radio service
(EGPRS), packet data, is a network
service that allows mobile phones to
send and receive data over an Internet
protocol (IP)-based network. It enables
wireless access to data networks such
as the Internet.
The applications that may use packet
data are MMS, browsing sessions, e-
Menu >
mail, remote SyncML, Java application
> Infrared.
downloading, push to talk, instant
messaging, and the PC dial-up.
>
To define how to use the service, select
Menu
Packet data
Select
data connection to be established
when an application needs it.
The connection will be closed when
the application is ended.
Select
to automatically connect to an packet
data network when it is switched on.
Modem settings
You can connect the phone using an IR
or a data cable (CA-42) connection to
a compatible PC, and use the phone as
a modem to enable packet data
connectivity from the PC.
To define the settings for connections
from the PC, select
Connectivity
> Settings > Connectivity
> Packet data
When needed to set the packet
Always online to set the phone
indicates a packet data connection.
Menu
> Packet data
>
connection.
> Settings >
> Packet