Ptt Settings - Nokia 5140i User Manual

P u s h t o t a l k

■ PTT settings

There are two kinds of PTT settings:
settings for connecting to the
service and settings for use.
You may receive the settings for
connecting to the service from your
network operator or service provider.
See "Configuration settings service"
p. xi. You can enter the settings
manually. See "Configuration"
To select the settings for connecting
to the service, select
to talk > Config. settings. Select
from the following options:
Configuration — to select a service
provider, Default, or
for PTT service. Only the
configurations that support the PTT
service are shown.
Account — to select a PTT service
account contained in the active
configuration settings
PTT user name, Default
PTT password, Domain, and
address
To edit the PTT settings for use,
select Menu > Push to talk
settings.
To select the phone to allow the
reception of incoming one-to-one
calls, select 1 to 1 calls
make but not receive one-to-one
calls, select Off. The service provider
may offer some services that
56
p. 43.
Menu > Push
Personal config.
nickname,
Server
> PTT
> On. To
Copyright © 2006 Nokia. All rights reserved.
override these settings. To set the
phone to first notify you of incoming
one-to-one calls with a ringing tone,
select Notify.
To activate the listened groups,
select Listened groups
To set the phone to automatically
connect to the PTT service when you
switch the phone on, select
status in startup > Yes.
To hide your PTT address from group
and one-to-one calls, select
PTT address > No.
> On.
PTT
Send my