Packet Data (Egprs) - Nokia 6020 User Manual

Do not point the IR (infrared) beam
at anyone's eyes or allow it to
interfere with other IR devices.
Infrared devices are Class 1 laser
products.
When sending or receiving data,
ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions between
the devices.
To activate the IR port of your phone
to receive data using IR, select
Menu > Settings
Infrared.
To deactivate the IR connection,
select Menu > Settings
Connectivity > Infrared. When the
phone displays Deactivate
select Yes.
If data transfer is not started within
2 minutes after the activation of the
IR port, the connection is cancelled
and must be started again.
IR connection indicator
When is shown continuously,
the IR connection is activated, and
your phone is ready to send or
receive data through its IR port.
When blinks, your phone is
trying to connect to the other
device, or a connection has been
lost.
> Connectivity >
>
infrared?,
Copyright © 2005 Nokia. All rights reserved.

Packet data (EGPRS)

Enhanced general packet radio
service (EGPRS), packet data, is a
network service which allows mobile
phones to send and receive data over
an Internet protocol (IP)-based
network. It enables wireless access
to data networks such as the
Internet.
The applications that may use packet
data are MMS, browsing sessions,
Push to talk, e-mail, remote SyncML,
Java application downloading, and
the PC dial-up.
To define how to use the service,
select Menu > Settings
Connectivity > Packet data
data connection.
Select When needed
packet data connection to be
established when an application
needs it. The connection will be
closed when the application is
terminated.
Select Always online
phone to automatically connect to
an packet data network when it is
switched on.
indicates a packet data
connection.
S e t t i n g s
>
> Packet
to set the
to set the
39